Crack-Sol Waterproofing: The Ultimate Solution for Cracks in Internal and External Brick Walls

Both homeowners and property managers can experience a lot of stress when cracks appear in plastered brick masonry walls. If ignored, these ugly fissures can cause structural damage and leakage of water, which not only detract from the pleasing look of the walls. Enter Crack-Sol Waterproofing, a ground-breaking solution that claims to end your wall-damaging moisture problems once and for all.

Crack-Sol is composed of high-quality weather durable acrylic emulsion polymer-based, single pack, ready to use flexible putty for filling the cracks in the plastered surface. Crack – Sol is an Acrylic modified resin in a single pack ready to use for filling the cracks on internal and external plastered surfaces. Crack – Sol is an acrylic Paste is composed of high quality, acrylic emulsion polymer. CFP has excellent bonding, easy to apply, is water resistance has aesthetic appearance & durability.

Table of Contents


Areas of Application: -

Internal & external plastered brick masonry wall cracks (max. up to 5 mm width crack.)
Keep you safe from Damping water Crack-Sol Waterproofing


Crack - Sol is used for internal and external plastered brick masonry wall cracks (max. up to 5mm width crack)
Consistency - Paste form, without sagging
Ease of application – Acrylic paste easy to apply by putty knife similar to conventional putties
Flexibility - Flexible, therefore does not crack & accommodates minor movements in the crack
VOC – Water-based with very low VOC hence eco-friendly
Durability - Excellent resistance to UV & atmospheric conditions
Bonding – High Performance, Excellent adhesion with the cementitious surface
Staining – Non-staining
Paint ability – overcoat able by any type of polymer-based paints, after 24 hrs.
Economical -Most effective and economical Crack Paste, Non-shrink
Requires only water to be added

Application Methods:

Surface Preparation:

The surface must be free from dust, oil, grease, and lose particles, etc.


Clean the surface of crack area and develop the crack in 'V' shaped groove, clean the prepared groove with light water to remove loose particles.
Take the single component Crack -Sol Paste acrylic paste and fill to the prepared substrate, up to 3 mm thickness .It can be applied with putty Knife.
For porous surface, apply primer coat prepared with Crack -Sol paste and water 1:1 proportion over the crack. Fill the Crack -Sol when the surface is tacky and not dried completely.
Press Crack -Sol firmly into the crack with a spatula or putty knives and level with the surface.
For porous surface, apply primer coat prepared with Crack -Sol paste and water 1:1 proportion over the crack. Fill the Crack -Sol when the surface is tacky and not dried completely.
Care must be taken to avoid formation cavities or bubbles during application
Allow it set 24hrs and then apply another coat of Crack -Sol.


Clean tools & equipment’s and hand with soap and warm water, immediately after use
Keep you safe from Damping water Crack-Sol Waterproofing

Shelf Life

  • Shelf life is 6 months from the date of manufacturing in unopened containers.

• Store at the cool and dry place, away from sun heat and under a shaded area

Key Note

What sets Crack-Sol Waterproofing apart from traditional crack-filling products is its eco-friendly nature. Being water-based and having very low volatile organic compounds (VOCs), it ensures a minimal impact on the environment and indoor air quality. This makes it a responsible choice for those conscious of their ecological footprint.

Another advantage of Crack-Sol Waterproofing is its non-staining property. Once applied, it blends seamlessly with the existing wall surface, leaving no unsightly marks or discoloration behind. This feature is particularly appreciated when dealing with walls of different colors or finishes, as Crack-Sol ensures a smooth and consistent appearance.



23-25 running meter/kg (for a depth of 5mm and width of 5mm).

Technical Details

Smooth & thick paste. Color off white


Viscous paste

Approx 74+/-2%

Approx 30 minutes


-5 to +60 c

Approx 60%


Approx 22%

Approx +10% at 27 c



The product information & application details given by the company & its agents has been provided in good faith & meant to serve only as a general guideline during usage. Users are advised to carry out tests & take trials to ensure on the suitability of products meeting their requirement prior to full scale usage of our products.

Since the correct identification of the problems, quality of other materials used and the on-site workmanship are factors beyond our control, there are no expressed or implied guarantee / warranty as to the results obtained. The company does not assume any liability or consequential damage for unsatisfactory results, arising from the use of our products.

Subscribe to our Youtube Channel for More information about Alcibay India Products.

The field is required mark as *

    By submitting, i’m agreed to Receive Calls & Emails