Aquasol-WP
What is Aquasol-WP waterproofing Solutions?
Polymeric waterproofing solution. Aquasol-WP Polymer Waterproofing Solutions is specially formulated using selected surface-active plasticizing agents, chemicals and additives for cement concrete, mortar and plasters. It makes concrete cohesive, prevents segregation and reduces water permeability. With Aquasol-WP Polymer Waterproofing Solutions, you’re not just getting temporary protection; you’re investing in long-lasting durability. These high-performance solutions are designed to withstand the test of time and the harshest environmental conditions. By creating a strong and durable barrier, Aquasol-WP ensures that your structures remain safeguarded for years to come.
Aquasol-WP Polymer Waterproofing Solutions take pride in their user-friendly application process. Their liquid-based solutions enable easy and seamless application, reducing the need for complicated installation procedures. Whether you’re a seasoned professional or a DIY enthusiast, you can achieve excellent waterproofing results with ease.
Table of Contents
WHY CHOOSE BLACK JAPAN WATERPROOFING
Why choose Aquasol-WP waterproofing Solutions?
Better Compatibility: Easily dispersible and compatible with concrete/mortar mixes
Permeability: It reduces the permeability of water into concrete and so improves waterproofing and increases
Workability: Improves workability of freshly mixed cement concrete
Compressive Strength: The setting time and compressive strength of the concrete remains within the specification limits
Suitable for horizontal & vertical surfaces
Resists corrosion: Protects reinforced steel against corrosion Shrinkage:
Reduces shrinkage crack development in plaster and concrete
Technical Details
Free flowing liquid
Yellow
1.00 (+/ - 0.1)
13 (+/-1) %
8 to 10
30 - 600 min.
Passes
As per the standard
WHY CHOOSE AQUASOL-WP
APPLICATION INSTRUCTIONS:
1) As a Bond Coat – - For a bond coat mix AQUASOL WP : Cement in the ratio 1:1 by volume - Brush apply 1 continous coat of the mix on the prepared concrete substrate - Ensure to overlay the repair mortar when the bond coat is still tacky
2)As an additive for repair mortar & Renders -
Aquasol WP 1 Part : Portland Cement 5 Parts : Sand 30 Parts
3) As a Waterproofing Coating -
For waterproofing, mix AQUASOL WP : Cement in the ratio 1:1 by volume
Mix for 2-3 minutes to avoid air entrapment. Add cement slowly to AQUASOL WP until the required consistency is achieved.
Apply 2 coats of the mix by brush in a span of 4-6 hours on the prepared concrete substrate
Overlay the coating with a protective screed to the desired slope & thickness
Shelf Life
12 month storage in sealed container and room temperature
DISCLAIMER:
This information is accurate and reliable to the best of the knowledge. It is meant as a guideline only. Durga Enterprises cannot give any guarantees circumstances for the results, or assume any obligation or liability in connection with the use of this information. It is recommended that the product be tested to determine its suitability for specific applications .Since, Durga Enterprises has no control over how others may use its products; it is recommended that the Specifier, Architect, Engineer, Contractor and Owner assume all the responsibilities in connection therewith.
Subscribe to our Youtube Channel for More information about Alcibay India Products.
The field is required mark as *
